Publications and Fact Sheets |
|
|
All Publications: Regulatory Fact Sheet: Lithographic Printing Process (May 2004) Virginia Department of Environmental Quality, Small Business Assistance Program fact sheet on the state air pollution control regulation affecting lithographic printing lines. Includes information on affected sources, exemptions, compliance schedule, standards, compliance methods, recordkeeping and registration requirements, and State contacts. Alabama Department of Environmental Management guidance on developing plans for urban watershed management to protect water quality. Topics include the benefits of good stormwater management practices, impacts of stormwater runoff, minimum stormwater management requirements under Phase II, management approaches, and reference appendices. California Integrated Waste Management Board case study of a hospital that purchased recycled-content products and established a comprehensive recycling program. Mississippi Department of Environmental Quality brochure on the ten permitting branches within the agency: Agricultural, Chemical Manufacturing, Construction and Building Materials, Energy and Transportation, General Permits, Metals and Metal Manufacturing, Municipal and Private Facilities, Service and Miscellaneous Industries, Solid Waste Management and Mining, and Timber and Wood Products. Massachusetts Office of Technical Assistance sample of a generic version of the integrated contingency plan (ICP, or “One Plan”) developed for a small paint manufacturing facility under the One Plan Case Study project. Massachusetts Office of Technical Assistance sample of a generic version of the integrated contingency plan (ICP, or “One Plan”) developed for a medium-sized metal finishing facility under the One Plan Case Study project. Oklahoma Department of Environmental Quality tips for businesses and citizens on reducing air pollution. 10 Tips Toward a Greener Shop (March 1997) US Screenprinters Institute article on environmentally friendly strategies for print shops. Maryland Department of the Environment fact sheet for school officials, training providers, and accredited persons on EPA’s asbestos-containing materials in school rule. ChemAlliance article presents an overview of the new Maximum Achievable Control Technology (MACT) National Emission Standards for Hazardous Air Pollutants (NESHAPs) of relevance to chemical and plastics manufacturers. The intent of these standards is to accelerate the use of advanced technologies to reduce the emissions of Hazardous Air Pollutants (HAP) and to thereby improve air quality. California Integrated Waste Management Board brochure on simple ways that the average person can help limit the amount of waste going to landfills, including grasscycling, composting, xeriscaping, recycling, buying recycled, and reusing. 112(r) Risk Management Program Georgia Department of Natural Resources document on the requirements of the Risk Management Program, Section 112(r) of the Clean Air Act. Topics include reporting requirements, hazard assessment, prevention programs, and emergency response. 15 Seconds of Fame--Hole Fixes Leak (Winter 1999) Minnesota Technical Assistance Program mini case study of Red Devil Equipment Company's strategy of minimizing product failures by improving measurement of lubrication oil. 15 Seconds of Fame--Ship Shape Shipping (Summer 1998) Minnesota Technical Assistance Program mini case study of BTD Manufacturing's introduction of reusable containers for shipping. 188 Hazardous Air Pollutants (October 2007) Virginia Department of Environmental Quality list of hazardous air pollutants regulated under the Clean Air Act. 189 Hazardous Air Pollutants (December 2006) Pacific Northwest Pollution Prevention Resource Center fact sheet listing the 189 Hazardous Air Pollutants (HAPs) and their CAS numbers as regulated under the 1990 Clean Air Act Amendments. 1993 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 1993 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. 1994 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 1994 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. 1995 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 1995 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. 1995 Governor's Waste Minimization Award Winners – Pollution Prevention Case Studies (February 1997) Pennsylvania Department of Environmental Protection report on the winners of the Governor's Award for Environmental Excellence. Links are provided to case studies of the winning projects. 1996 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 1996 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. North Carolina Department of Environment and Natural Resources collection of case studies of companies that have received the Governor’s waste reduction award, which recognizes North Carolina industries and government agencies and institutions for their accomplishments in reducing, eliminating and managing their wastes by using innovative source reduction methods, reuse, and recycling programs and energy recovery systems. 1997 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 1997 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. Pennsylvania Department of Environmental Protection report on the winners of the Governor's Award for Environmental Excellence. Links are provided to case studies in the following categories: striving for zero emissions, recycling, education/outreach, pollution prevention, energy efficiency/renewables, land use, and technology. North Carolina Department of Environment and Natural Resources collection of case studies of companies that have received the Governor’s waste reduction award, which recognizes North Carolina industries and government agencies and institutions for their accomplishments in reducing, eliminating and managing their wastes by using innovative source reduction methods, reuse, and recycling programs and energy recovery systems. 1998 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 1998 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. North Carolina Department of Environment and Natural Resources report on the state’s recycling industry, North Carolina’s waste stream for 1997 and 2002, supply and demand for 26 recyclable materials, and trends and highlights changes that have occurred during the years. Links are provided to each section of the report, including the 26 Commodity Profiles developed for this assessment: Construction and Demolition Debris, Electronics, Glass, Metals (Aluminum Cans and Scrap, Steel Cans and Scrap), Oil-Related (Used Oil, Used Oil Filters), Organics (Food Residuals, Yard Wastes), Paper (Old Corrugated Cardboard, Old Newspaper, Old Magazines, Office Paper, Mixed Paper), Plastics (PET-#1, HDPE-#2, PVC-#3, L/LDPE-#4, PP-#5, PS-#6), Textiles (Carpet, Post-Consumer Textiles), Tires, White Goods, and Wood (Wooden Pallets, Wood Residues). 1998 Upgrade Requirements (January 2002) Maryland Department of the Environment fact sheet for underground storage tank owners and operators on upgrade requirements to protect from spills, overfills, and corrosion. California Integrated Waste Management Board summary of survey results on paper use and waste reduction practices in California law offices. The Board, in partnership with the Environmental Law Section of the State Bar of California, conducted the survey in April 1999. 1999 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 1999 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. Missouri Department of Natural Resources report on the status of solid waste management in the state. Topics include: a history of solid waste, what is and is not being disposed, integrated solid waste management, future plans, and references. 20 Ways to Cut Water Usage in Plating Shops Finishing.com description of strategies to reduce water use in plating shops, including: double dipping, top sprays, cooling towers, timed water additions, fiberglass hanger arms, and full depth spray. 2000 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 2000 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. Maryland Department of the Environment highlight sheet from the state’s design guidance manual on best management practices for reducing the impact of stormwater runoff from land development activities. Unified stormwater sizing criteria, acceptable urban best management practices groups, and stormwater credits for innovative site planning are featured. 2000 Maryland Stormwater Design Manual, Volumes I and II (October 2000) Center for Watershed Protection and Maryland Department of the Environment manual of design guidance on the most effective best management practices for reducing the impact of stormwater runoff from land development activities. Links are provided to manual sections and appendices. Michigan Department of Environmental Quality summary of the chemical releases and waste management activities of state facilities that are subject to TRI reporting requirements. Massachusetts Department of Environmental Protection fact sheet summarizing the 2000 Toxics Use Reduction Information Release. Santa Barbara County Air Pollution Control District overview of the District’s strategic Clean Air Plan, which it prepares under the federal Clean Air Act. Topics include: Clean Air Plan components, plan adoption, and plan implementation. 2001 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 2001 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. Massachusetts Department of Environmental Protection Fact sheet summarizing the 2001 Toxics Use Reduction Information Release. Chemical use, waste generation, releases to the environment, and other waste management strategies are discussed. 2002 Directors' Award in Pollution Prevention Alabama Department of Environmental Management 2002 Directors' Awards in Pollution Prevention, presented to Alabama businesses and industries that have demonstrated leadership and commitment to wise management in protecting the environment and public health through pollution prevention. Recipients of the Directors' Award have implemented facility-wide written P2 plans and have demonstrated the environmental benefits of pollution prevention techniques and practices. 2002 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 2002 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. Massachusetts Department of Environmental Protection report on chemical data gathered under the TURA Program for 2002, including chemical use, byproduct (or waste) generation, releases to the environment, and other waste management. 2003 Governor's Award Recipients Vermont Department of Environmental Conservation case studies of the 2003 Governor’s Award recipients, who were recognized for their efforts to protect and enhance the environmental quality of Vermont by conserving natural resources and preventing pollution. California Air Resources Board fact sheet on the state’s zero emission vehicle (ZEV) program that requires automakers to put small ZEV demonstration fleets on the road in the 1990s and market such vehicles by 2003. Benefits of the ZEV regulation, other electric vehicle benefits, and sources of additional information are discussed. U.S. Environmental Protection Agency strategic plan for the years 2003 through 2008. Topics include goals such as: clean air and global climate change, clean and safe water, land preservation and restoration, healthy communities and ecosystems, and compliance and environmental stewardship. Also included are cross-goal strategies such as: partnerships, information, innovation, human capital, science, homeland security, and economic and policy analysis. Appendices include: social costs and benefits, program evaluations, summary of consultation efforts, and coordination between EPA and other federal agencies. 2004 Clean Air Plan Three-Year Update for the California Clean Air Act Santa Barbara County Air Pollution Control District update of the District’s strategic Clean Air Plan, which shows progress towards meeting the state one-hour ozone standard. This update does not affect the 2001 Clean Air Plan, which remains effective for federal requirements. Washington State Department of Ecology profile of the governor’s pollution prevention award winners, for which recipients winners invested in innovative ways to offer their services and products while minimizing waste, and conserving energy, water and other vital resources. Indiana Department of Environmental Management annual report on the activities and accomplishments of the compliance and technical assistance program. Topics include: types of contacts made, assistance efforts as compared to number of staff members, types of referrals, users of CTAP services, workshops offered, measuring results, types of assistance provided, and site visits. 2005 Emissions Inventory Guidelines (RG-360/05, February 2006) Texas Natural Resource Conservation Commission guidance for air emission sources on completing the emissions inventory questionnaire. Key sections include: general instructions that are applicable to all emissions inventory submittals, new accounts and completing a first inventory, and updating the questionnaire. The appendices contain all blank forms and useful tables. Ohio Environmental Protection Agency fee schedule for various permits and activities related to surface water, drinking water, hazardous waste, community right-to-know, solid and infectious waste, air pollution, and the voluntary action program. Massachusetts Department of Environmental Protection guidance manual for facilities that manufacture, process or use certain toxic materials on updating their Toxics Use Reduction Plans, which is required every two years. Topics include: a plan update worksheet, plan content requirements, and reference appendices. Alaska Department of Environmental Conservation overview of the state’s marine vessel emission standard for commercial passenger vessels. Topics include opacity monitoring, enforcement, public complaints, and ambient air monitoring in Juneau. 2007 Cotton Insect Control Guide (P343, February 2007) Mississippi State University Extension Service guidance document on controlling cotton insect pests. Application rate and precautions for various pesticides are discussed. Alaska Department of Environmental Conservation discussion of the changes in cruise ship discharge limits set by the by the 2008 large cruise ship general permit as compared to previous regulatory requirements. Virginia Small Business Assistance Program calendar for dry cleaning establishments to assist in annual recordkeeping and reporting requirements. Pollution prevention tips and good business practices also are included. Virginia Small Business Assistance Program calendar for gasoline dispensing facilities to assist in annual recordkeeping and reporting requirements. Pollution prevention tips and good business practices also are included. Arizona Department of Environmental Quality checklist to assist the applicant in preparing a stormwater pollution prevention plan that contains all required elements. 2008 Integrated Water Quality Assessment and Monitoring Report Alabama Department of Environmental Management report on the surface and ground water resource management programs in the state including the condition of all surface waters according to their designated uses and the degree to which water quality is supporting those uses. Topics include water quality standards, rivers and streams, lakes ad reservoirs, wetlands, groundwater assessment, coastal waters, nonpoint source management, public health, and concerns and recommendations. Minnesota Pollution Control Agency recordkeeping calendar for feedlots to ensure compliance with various environmental regulations. Georgia Department of Natural Resources calendar to assist dry cleaners in proper recordkeeping to ensure compliance with environmental regulations. Massachusetts Department of Environmental Protection guidance manual for facilities that manufacture, process or use certain toxic materials on the planning process and required elements for a Toxics Use Reduction Plan. This Plan must include information on the management of toxics and strategies for reducing toxics use. Topics include: an overview of the program, general plan guidance, and the planning process and plan contents. 21 Most Common Food Service Problems (December 1996) Alaska Department of Environmental Conservation list of 21 problems that are the most common deficiencies found in food service facilities within Alaska. These problems are spotted by the Environmental Health Officers during inspections of the facilities. Solutions are suggested for each problem noted. 25 Things You Can Do for Cleaner Air (June 2000) South Carolina Department of Health and Environmental Control, Bureau of Air Quality fact sheet on general things you can do for cleaner air. Topics include: driving less, driving smart, choosing air-friendly products, and saving energy. 401 Water Quality Certification (DEP-IWRD-FS-103, June 2003) Connecticut Department of Environmental Protection fact sheet on regulating activities that may result in any discharge into water. Topics include: who must apply, required application documents, review and processing, unique processing features, public participation, and average processing time. 5 Important Reasons Why Louisiana Should Recycle Louisiana Department of Environmental Quality fact sheet listing five environmentally sound reasons for recycling in the state of Louisiana. 50 Things You Can Do for Cleaner Air (May 2003) California Air Resources Board pamphlet on air pollution reduction strategies. Topics include: driving less, driving smart, choosing air-friendly products, saving energy, and reducing waste. 5-Star Environmental Recognition for Child Care Facilities (December 2007) Indiana Department of Environmental Management fact sheet on the state’s environmental and child safety recognition program for child care facilities. Program participation criteria for the various star levels are provided. New York Small Business Assistance Program fact sheet on the requirements for flexographic printing operations located in the New York City Metropolitan Area. Topics include: compliance options; recordkeeping; handling, storing, and disposing of VOCs; permit/registration requirements; and pollution prevention tips. New York Small Business Assistance Program fact sheet on the applicability of the RACT for NOx, as it applies to large and small boilers and internal combustion engines. New York Small Business Assistance Program fact sheet on the testing and reporting requirements for operators of Stage II vapor recovery equipment. Topics include: testing frequency, the three types of tests required, conducting the tests, recordkeeping and reporting, and daily visual inspections of Stage II equipment. New York Small Business Assistance Program fact sheet on a regulation that limits the volatile organic compound (VOC) emissions from printing operations, including fountain solution requirements; recordkeeping; handling, storing, and disposing of VOCs; and sources of additional information. North Carolina Division of Pollution Prevention and Environmental Assistance tips on waste minimization strategies for the workplace. New York Small Business Assistance Program fact sheet on the equipment phase-out and retrofit deadlines for perc drycleaners from late 1998 and onward. Transfer machines (first generation), dry-to-dry vented machines, third-generation machines, and fourth-generation machines are discussed. New York Small Business Assistance Program fact sheet on retrofits and upgrades required for perc drycleaners for 1997 and early 1998. Transfer machines (first generation) and dry-to-dry vented machines are discussed. New York Small Business Assistance Program fact sheet on the leak detection inspections that owners and operators of drycleaning facilities must conduct. Topics include: leak detection equipment, what to inspect, and what to do if a leak is detected. New York Small Business Assistance Program fact sheet on the recordkeeping requirements for owners and operators of perc drycleaning facilities. Records must be maintained for maintenance, purchases, leak detection inspections, and compliance reports. New York Small Business Assistance Program fact sheet on drycleaner requirements for environmental permits and registrations. New York Small Business Assistance Program fact sheet on the equipment specifications for new fourth-generation drycleaning equipment. Topics include: primary emission control system, drying sensor, secondary control system, training/operating manual, and permitting and reporting. New York Small Business Assistance Program fact sheet on drycleaner requirements for vapor barriers and exhaust systems for mixed-use facilities and the applicable deadlines. New York Small Business Assistance Program fact sheet on new compliance requirements for drycleaners. Regulation topics include: air emissions, hazardous waste management, emergency response, and wastewater management. Maine Waste Management and Recycling Program fact sheet on establishing an office paper recycling program. A Basic Checklist for USTs (Doc. #107a, August 1999) Green Truck/American Trucking Association checklist of federal requirements for proper UST operation. Topics include: release detection, corrosion protection, spill protection, overfill protection, recordkeeping, notification, UST closure, financial responsibility, and corrective action. Sources of additional information are included. A Basic Checklist for USTs (EPA 510-F-99-003, 1999) U.S. Environmental Protection Agency information and checklist for underground storage tank owners and operators on federal requirements for operating tanks properly. Wisconsin Department of Natural Resources fact sheet on the state’s uniform reclamation standards and locally administered reclamation permit program for nonmetallic mining operations. Topics include the reclamation plan and standards, financial assurance, permits, DNR technical assistance and oversight, funding, and registration. Idaho Division of Environmental Quality guidance document to assist businesses reduce the amount of waste they produce, including hazardous waste, air emissions, water discharges, and solid waste. Opportunities to conserve resources, such as energy and water, are discussed. This is a tool for business managers and their employees to understand the benefits of pollution prevention, learn how to develop a pollution prevention program, and know who to call for assistance. A Checklist for Feedlot Siting and Environmental Compliance (AS-1155, October 1998) North Dakota State University Extension Service fact sheet on selecting a feedlot site to minimize environmental impact. Topics include: regulatory requirements, space requirements, slope, soil types, orientation, surface water, groundwater, odor, zoning, winter protection, mounding, volume/composition of waste, runoff management, reuse, and additional resources. North Carolina Department of Environment and Natural Resources checklist of waste management and waste reduction opportunities that can improve performance and reduce operating costs in an office. Key areas include: paper use, equipment use, recycling and reuse, utilities, and office sustainability practices. U.S. Environmental Protection Agency checklist for owners, operators, plant managers, and others responsible for risk management plan implementation for preparing a 5-year plan update as required by law. Topics include: the 5-year update requirements, how to determine the 5-year anniversary date, important information for 2004, a checklist for plan updates, recurring requirements, and sources of additional information. State Coalition for Remediation of Drycleaners list of historical milestones in the development of dry cleaning solvents, equipment, and regulations. Maine Department of Environmental Protection guide to standard erosion and sediment control measures for various activities. Topics include: buffers, commercial site best management plans, construction site dewatering, construction planning, culvert outlet protection, erosion control blanket mulching, houselot development, mulching, riprap - ditch stabilization, riprap stabilization - slope or shoreline, sediment barriers, soil stockpiles, vegetated ditches, vegetation, and winter stabilization. Michigan Department of Environmental Quality brochure on obtaining an air permit to install and operate equipment or processes that may emit air contaminants. Topics include: who must apply, required information, site selection, and the permit approval process. A Citizen's Guide to Open Burning Delaware Department of Natural Resources and Environmental Control, Air Quality Management Section brochure on open burning regulations for homeowners. Topics include: what is legal and illegal, why open burning is regulated, types of air pollutant emitted from open burning, composting as an alternative to burning, and penalties for burning illegally. South Carolina Department of Health and Environmental Control guide for individuals and homeowners associations on the proper function and maintenance of stormwater ponds. Instructions are provided on inspections, dredging, weed control, herbicides, pollutants and pesticides. Photos and descriptions of nuisance aquatic plant species also are provided to aid in the identification and removal of these species from stormwater ponds. A Closer Look at Methyl tertiary-Butyl Ether (MtBE) in Reformulated Gasoline (ARD-29, 2006) New Hampshire Department of Environmental Services fact sheet on reformulated gasoline, a cleaner burning fuel that can help to reduce ozone levels. Topics include: benefits, health concerns, and actions to protect the public from exposure. Wisconsin Small Business Clean Air Assistance Program fact sheet describing the things you might expect during an air program inspection and some items you should be prepared with upon the arrival of the inspector. Wisconsin Department of Natural Resources answers to commonly asked questions about regulations and technical considerations for temporary wells. Maine Department of Environmental Protection guide to the environmental laws that affect wood harvesting activities. Key chapters cover Protection and Improvement of Waters, Erosion and Sedimentation Control Law, the Natural Resources Protection Act, Shoreland Zoning, and the Forest Practices Act. North Carolina Department of Environment, Health, and Natural Resources guide to conducting a waste audit. The six steps discussed are obtaining corporate commitment, selecting an audit team, gathering background data/constructing a flow diagram, conducting a plant survey, performing a materials balance, and evaluating reduction alternatives. A case study, various reference sources, and a checklist for conducting an in-plant survey are provided. South Carolina Department of Health and Environmental Control, Office of Environmental Quality Control guide to environmental permitting, focused on actions that must be taken before an individual or company constructing/starting up a facility or process would become a source of pollution. Delaware Department of Natural Resources and Environmental Control step-by-step guidelines for private facility owners on bioremediation of hydrocarbon-contaminated soils generated on site. Connecticut Department of Environmental Protection brochure on how individuals can reduce adverse impacts on the environment by saving water and energy, reducing waste, shopping green, using alternative methods of transportation, and practicing low-impact lawn/garden maintenance. Oklahoma Department of Environmental Quality fact sheet on choosing and operating a distillation unit to reclaim solvent waste. Topics include pollution prevention, benefits, questions to ask a vendor, safety features, reducing still bottoms, complying with hazardous waste regulations, and a cost-benefit analysis. University of Wisconsin Solid and Hazardous Waste Education Center guide to managing dental practice waste, including amalgam, x-ray fixer and developer, lead foil or shields, disinfectants, chemiclave waste, and other types of waste. Alternatives to amalgam, amalgam recyclers, and mercury recyclers are provided. Massachusetts Department of Environmental Protection fact sheet for beverage bottlers, distributors, dealers, and redemption centers regarding their requirements under the beverage container deposit and redemption regulation. A Guide for Fiberglass Operations (#96-430, September 1996) Washington State Department of Ecology guide for fiberglassers, including topics such as applicable regulations, improvement of operating practices, resources, and contacts. Washington State Department of Ecology guide that outlines the waste management requirements and pollution prevention guidelines for lithographic printers. Topics include regulations, pollution prevention, waste streams of concern, practical tips, managing used fixer, water quality requirements, and hazardous waste requirements. Massachusetts Department of Environmental Protection brochure for fuel oil distributors on ways releases have occurred during heating oil deliveries and simple steps that can be taken to prevent or reduce the likelihood of a release. Hawaii Department of Health, Clean Air Branch slide presentation on environmental compliance requirements for perc dry cleaners. Washington State Department of Ecology guide on the waste management requirements and pollution prevention guidelines for film and photo processors. Topics include: regulations, pollution prevention, waste streams of concern, practical tips, managing silver-bearing wastes, water quality requirements, and hazardous waste requirements. Occupational Safety and Health Administration guidance on the principal hazards of woodworking and the methods for controlling these hazards, primarily focusing on the safety hazards associated with woodworking machinery and the health hazards of wood dust. Washington State Department of Ecology guide on waste management requirements and pollution prevention guidelines for screen printers. Topics include: regulations, pollution prevention, waste streams of concern, practical tips, managing used fixer, water quality requirements, and hazardous waste requirements. Florida Department of Environmental Protection list of state certified requirements for becoming a used oil transporter and guidelines for developing a transporter training program. Florida Department of Environmental Protection guide for agricultural pesticide users on how to comply with federal and state hazardous waste regulations, avoid penalties by properly managing hazardous pesticide wastes, and save money on disposal costs by through waste minimization practices. A list of pesticides that are regulated under hazardous waste laws is included. Florida Department of Environmental Protection booklet for laboratory owners, operators, and employees on how to comply with federal and state hazardous waste regulations, avoid penalties by properly managing hazardous wastes, and save money on disposal costs by reducing hazardous wastes. Florida Department of Environmental Protection guide for photo shop owners and operators on how to comply with federal and state hazardous waste regulations, avoid penalties by properly managing hazardous wastes, and save money on disposal costs by through waste minimization practices. Florida Department of Environmental Protection guide for printed wiring board manufacturers on how to comply with federal and state hazardous waste regulations, avoid penalties by properly managing hazardous wastes, and save money on disposal costs by through waste minimization practices. Florida Department of Environmental Protection guide for printers on how to comply with federal and state hazardous waste regulations, avoid penalties by properly managing hazardous wastes, and save money on disposal costs by through waste minimization practices. Florida Department of Environmental Protection, Division of Waste Management fact sheet on typical hazardous wastes from automotive repair shops, their sources, and how they can be managed and reduced. Florida Department of Environmental Protection, Division of Waste Management booklet offering tips on how to comply with federal/state hazardous waste regulations, how to avoid penalties by properly managing hazardous wastes, and how to save money on disposal costs by reducing hazardous wastes. Florida Department of Environmental Protection, Division of Waste Management fact sheet on hazardous waste reduction for plastic manufacturers. Florida Department of Environmental Protection, Division of Waste Management fact sheet on identifying hazardous wastes, sources of hazardous waste, and how they can be managed and reduced. Florida Department of Environmental Protection, Division of Waste Management publication on hazardous waste minimization techniques and requirements for auto body paint and repair shops. Colorado Department of Health and Environment fact sheet on state and federal air emission requirements for owners and operators of aluminum sweat furnaces. Topics include NESHAP requirements, air permit requirements, applicable fees, operating requirements, testing requirements, afterburner monitoring requirements, notifications and reports, recordkeeping, and sources of permitting assistance. Colorado Department of Health and Environment guidance on air permitting, operating, training, and recordkeeping requirements for crematories. Colorado Small Business Assistance Program fact sheet on the air permitting, operating, training, and recordkeeping requirements for facilities that operate an incinerator in the state. Colorado Department of Health and Environment fact sheet on the air quality requirements for wood-burning appliances, approved wood-burning devices, and tips for safely burning wood. Colorado Department of Health and Environment guide to the air pollution reporting and permitting requirements for gasoline and diesel fuel dispensing stations with underground storage tanks. Topics include environmental concerns, reporting requirements, pollution controls, housekeeping, recordkeeping, the Small Business Assistance Program, and calculating emissions from underground storage tanks. Broward County (FL) Air Quality Division brochure on reducing fuel costs, hybrid vehicles, and the advantages of alternative fuels. U.S. Environmental Protection Agency, Office of Research and Development guide on cleaner technologies that can be used to reduce waste and emissions from metal finishing operations. North Carolina Department of Environment and Natural Resources guide to the use of composting to dispose of dead poultry. Topics include: composter location, ingredients, requirements, monitoring, and sources of additional information. Texas Commission on Environmental Quality guidance manual on the components of an environmental management system and creating and implementing an EMS. Topics include: defining your scope, creating your environmental policy, assigning responsibility, identifying the environmental aspects of your business, setting and pursuing compliance goals, determining the significant environmental aspects of your business, setting and pursuing environmental performance goals, documenting EMS implementation, evaluating performance, and demonstrating results. Wisconsin Department of Natural Resources step-by-step guidance to assist nonmetallic mine operators in preparing reclamation plans for their nonmetallic mining sites. Numerous resources also are provided that may be helpful for operators that choose to prepare a reclamation plan without outside assistance. Colorado Small Business Assistance Program guidance on the regulations governing abrasive blast cleaning units and controlling the particulate matter that is generated. Topics include: environmental areas of concern, reporting requirements, permits, exemptions, pollution prevention options, pollution controls, housekeeping, recordkeeping, and sources of additional assistance. Colorado Department of Public Health and Environment fact sheet on the air, waste, and water regulations that may apply to auto repair shops. Colorado Small Business Assistance Program guidance on air, water, and waste regulations affecting Colorado surface coaters. Pollution prevention (P2) strategies designed to reduce regulatory requirements for surface coaters also are discussed. Colorado Small Business Assistance Program guidance for petroleum dry cleaning facilities on the need to file an Air Pollution Emission Notice or obtain an air permit from the Department. Topics include: attainment and non-attainment areas, permit filing requirements, performance testing, test procedures, recovery rate calculation, and sources of assistance. Colorado Department of Health and Environment fact sheet on environmental requirements that may apply to a printing or imaging business. Regulatory requirements are discussed for air, hazardous waste, water, and stormwater. Pollution prevention tips and sources of technical assistance also are provided. Colorado Department of Public Health and Environment overview of the environmental regulations affecting restaurants, food service businesses, and grocery markets. Air, water, waste, and consumer protection regulations are discussed, and pollution prevention strategies are offered. Colorado Department of Health and Environment fact sheet on the definition of used oil, reasons the burning of used oil is regulated, hazardous waste and air emission requirements, and sources of assistance. Arizona Department of Environmental Quality guide to assist facilities conduct a pollution prevention analysis and develop a Pollution Prevention Plan. Plan development includes: establishing a formal written pollution prevention policy, obtaining management commitment, identifying waste streams, analyzing resulting data, identifying pollution prevention opportunities, and conducting feasibility studies. Florida Department of Environmental Protection booklet on the environmental, economic, and aesthetic benefits of wetlands. Key points include: definition of a wetland, the value of wetlands, threats to wetlands, protecting wetlands, ecosystem management and wetlands stewardship, and being a good environmental citizen (with helpful tips for businesses and homeowners). Utah Department of Environmental Quality guide to product information sheets that list ingredients and potential hazards associated with those ingredients. Topics include: properties that make a product hazardous, general rules for identifying product hazards, information found on a Material Safety Data Sheet, hazardous waste characteristics, and information resources. California Department of Health Services guide to reducing mercury use and contamination in healthcare facilities. Topics include: hospital equipment and devices containing mercury, mercury concerns in healthcare operations, case studies, where mercury is found and why it is present, and procedures for responding to a mercury spill. Minnesota Pollution Control Agency guide to noise control, acoustical properties, measurement, analysis, and regulation. Chapter topics include: using decibels, human perception of sound, measurement procedures, rules of thumb, regulatory agencies, and noise rules and statutes. Missouri Department of Natural Resources fact sheet for businesses that have received a Notice of Violation or Excess Emissions on understanding the enforcement process. Topics include: NOVs, responding to NOVs, settlement offer letters, settlement negotiations, and information sources. Missouri Department of Natural Resources guidance on which permits can be transferred, the nature of information required, public notice requirements, forms, fees, timing and who to contact. The booklet is set up as a series of tables, each table covering the permits or registrations of a permitting program within the department. Forms and instructions are provided in many cases. The following programs are covered: Air Pollution Control, Geological Survey and Resource Assessment, Hazardous Waste, Underground Storage Tanks, Land Reclamation, Public Drinking Water, Solid Waste Management, and Water Pollution Control. South Carolina Department of Health and Environmental Control guide to the major steps involved in the processing of applications for a Construction in Navigable Waters Permit. Topics include: the definition of state navigable waters; when a permit is required; applications and public notices; required information; public review; projects within the coastal zone; time frames, objections to the application, reconciliation; replacement/compensation; notice of proposed decision, where to direct questions, and the permitting process. A Guide to Plugging Abandoned Wells (AE-996, June 1994) North Dakota State University Extension Service guidance document on the proper management of abandoned wells. Topics include: hazards, regulations, well plugging materials, well plugging steps, well pits, sand point wells, plugging records, and options. Several appendices are provided. Texas Natural Resource Conservation Commission guide for large and small quantity generators and TRI reporters on preparing a source reduction and waste minimization plan as required by the Waste Reduction Policy Act. Topics include preventing pollution, developing a company environmental policy, conducting pollution prevention assessments, implementing P2 projects, and documenting the plan and reporting results. Reference appendices, examples, and sample worksheets are provided. Wisconsin Department of Natural Resources guidance on information and technical assistance in preparing and reviewing financial assurance (bonds, letters of credit, escrow accounts, etc.) for nonmetallic mine operations. Topics include an overview of financial assurance, relevant rules, and a general flow chart for the process of securing financial assurance. Technical information, helpful publications and web sites, an optional calculation worksheet and summary table, and information on various types of financial assurance are provided. Occupational Safety and Health Administration guidance on OSHA’s scaffold standard, which is designed to protect workers using scaffolding in the construction and other industries. Topics include general requirements, specific scaffold and aerial lift requirements, training, OSHA assistance services, and references. Montana Department of Environmental Quality guidance on the permitting process and requirements for projects in streambeds, streambanks, wetlands, or floodplains. Permitting tips and other applicable laws are discussed. A Guide to the Emission Reduction Credits (ERCs) System Santa Barbara County Air Pollution Control District guide to ERCs – credits earned by a company when it reduces air emissions beyond what is required by permits and rules. Topics include: emission offsets, steps to follow to earn and redeem ERCs, ERCs and nonregulated businesses, and sources of additional information. South Carolina Department of Health and Environmental Control guide to infectious waste management regulations, including common questions, sharps, regular and small quantity generators, packaging, labeling, storage, transportation, and treatment and disposal. Washington State Department of Ecology brochure on the environmental impacts of used oil and what can be done to alleviate the used oil problem, including recycling. A Guide to Transporter Rules (September 2005) Montana Department of Environmental Quality guide to hazardous waste transporter regulations, including transporter registration, transporter facilities, and Montana transporter rules. A list of relevant agencies and links to related useful services are provided. Idaho Department of Environmental Quality summary of visible air emissions certification requirements and required observation techniques for making opacity determinations. AWashington State Department of Ecology guidance for well drillers on qualifying for, obtaining, and renewing each type of well operator license. Topics include: the training program, the full well operator license, qualifying for both a water and a resource protection well operator’s license, and license renewal. A Hazardous Waste Guide for Farmers (May 1999) New York Department of Environmental Conservation, Pollution Prevention fact sheet on hazardous wastes generated by farmers. Topics include: what is hazardous waste, which wastes are likely to be hazardous, regulatory requirements, assistance contacts, and pollution prevention methods. Maine Department of Environmental Protection guide to the five main environmental laws relevant to shorefront property: The Protection and Improvement of Waters Law, The Erosion and Sedimentation Control Law, The Natural Resources Protection Act (NRPA) and its associated regulations; the Seasonal Conversion Law, and the Mandatory Shoreland Zoning Act(MSZA), plus corresponding local ordinances. Idaho Department of Environmental Quality brochure on the basics of caring for a septic system. Topics include: household wastewater, septic system components, caring for a septic system, warning signs of system failure, and sources of additional information. A Landowner's Guide to Streambank Protection and Stabilization (September 1999) Tennessee Department of Environment and Conservation fact sheet for landowners on protecting and stabilizing streambanks. Topics include: answers to frequently asked questions, stabilizing streambanks, keeping streams healthy, and permitting. Vermont Department of Environmental Conservation guidance manual to help metal fabricators understand environmental regulations, reduce wastes, minimize some regulatory requirements, and reduce a shop’s impact on the environment. The first section consists of self-audit compliance checklists for hazardous waste, wastewater discharges, and air pollution. The second section contains fact sheets for wastes and environmental issues commonly found in autobody repair shops and provides information about regulatory issues, pollution prevention, and best management practices. The Appendices include additional useful information, such as sample regulatory forms and resource lists. Arizona Department of Environmental Quality guide to assist facilities in successfully implementing the Arizona Pollution Prevention Plan and reporting requirements. This guide focuses on identifying, evaluating, and prioritizing options according to pollution prevention hierarchy, implementation potential, option type, and cost. Texas Commission on Environmental Quality guidance manual for metal finishing facilities on the main components of an environmental management system, creating and implementing an EMS, and the benefits and regulatory incentives available from TCEQ to those who choose to have their EMS evaluated and certified. An EMS model for a hypothetical metal finisher, necessary forms, and information resources are provided. A New Prescription: Pollution Prevention Strategies for the Health Care Industry (October 1998) Massachusetts Executive Office of Environmental Affairs and the Office of Technical Assistance for Toxics Use Reduction proceedings from the October 7, 1998 conference, A New Prescription: Pollution Prevention Strategies for the Health Care Industry.” Papers and presentation materials from speakers at the conference, as well as other relevant materials, are included. A detailed resource list of relevant books, articles, websites and other sources of information also is provided. A Partner Approach to Resource Management at Synthetic Industries Georgia Department of Natural Resources case study of Synthetic Industries' team-based environmental program that identifies and implements pollution prevention and recycling opportunities throughout the company. West Virginia Department of Environmental Protection guide to the use of risk assessment in the Voluntary Remediation Program (VRP) in West Virginia. Topics include: estimating and describing risk, risk from exposure and toxicity, VRP standards, a glossary, and a checklist for conceptual site model development. A Pollution Prevention (P2) Checklist for Your Home, Office, and Car Maryland Department of the Environment checklist for consumers on choosing environmentally safe household products, reducing solid waste, and conserving energy and water. Florida Pollution Prevention Program fact sheet on how to develop a pollution prevention project plan. The contents of each section of the plan are described. A Pollution Prevention Guide for Automotive Repair Shops (January 2005) Delaware Department of Natural Resources and Environmental Control pollution prevention guide to reducing, reusing, and recycling hazardous waste in automotive repair shops. A Pollution Prevention Guide for Building Construction and Demolition (January 2005) Delaware Department of Natural Resources and Environmental Control pollution prevention guide to reducing waste disposal costs, reducing long-term liability, preserving environmental quality, improving workplace health and safety, and projecting a positive public image in the building construction and demolition industry. A Pollution Prevention Guide for Fleet Management (January 2005) Delaware Department of Natural Resources and Environmental Control pollution prevention guide on waste reduction techniques for solvents, oils, and other wastes used by fleet management. Topics include recycling, essential elements of a successful program, and sources for additional help. A Pollution Prevention Guide for Food Processors (January 2005) Delaware Department of Natural Resources and Environmental Control pollution prevention guide to management of water waste and solid wastes, including sludge, off-spec product, waste oils, spent and dirty filters, empty raw materials containers, outdated inventory, and damaged pallets produced from food processing. A Pollution Prevention Guide for General Business Practices (January 2005) Delaware Department of Natural Resources and Environmental Control guide to pollution prevention methods for business generated wastes such as heat and/or energy losses, maintenance and cleanup wastes, obsolete/outdated stock, solid wastes, spills and leaks, spoiled production runs, and hazardous wastes. Topics include how to get started, good housekeeping practices, production changes, recycling, and following up. A Pollution Prevention Guide for Metal Fabricators (January 2005) Delaware Department of Natural Resources and Environmental Control pollution prevention guide to management of hazardous waste generated from metal fabricating processes. Topics include how to get started, improving operating procedures, material substitutions, extending process bath life, reducing drag-out, and conserving rinse water. A Pollution Prevention Guide for Small Chemical Manufacturing Operations (January 2005) Delaware Department of Natural Resources and Environmental Control pollution prevention guide for small chemical manufacturing operations. Topics include waste reduction methods, how to start a waste reduction plan, how to improve operating procedures, and ideas for production process and equipment modifications. A Pollution Prevention Guide for the Dry Cleaning Industry (January 2005) Delaware Department of Natural Resources and Environmental Control pollution prevention guide to hazardous and nonhazardous waste reduction methods for the dry cleaning industry. A Pollution Prevention Guide for the Office (January 2005) Delaware Department of Natural Resources and Environmental Control fact sheet on pollution prevention for offices. Topics include: setting up a program, reducing and reusing waste, common areas where large quantities of waste are produced, finding a recycling vendor, and sources of additional assistance. A Pollution Prevention Guide for the Printing Industry (January 2005) Delaware Department of Natural Resources and Environmental Control pollution prevention guide for the printing industry. Topics include good housekeeping practices; reducing toxicity and quantity of printing wastes; reducing, reusing, and recycling other wastes; and sources for additional help. New York State Department of Environmental Conservation guide to reducing mercury emissions from incinerators. Topics include: sources of mercury, best management of mercury wastes, and mercury free alternatives. A list of mercury recyclers in the northeast also is included. Ohio Environmental Protection Agency practical guide to pollution prevention and waste reduction for the metal finishing industry, including discussions of the regulatory environment, waste reduction techniques, and a vendor matrix table. University of Tennessee Center for Industrial Services guidance for employers and employees in the composting and mulching industry to develop a safety program that is compliant with regulations and effective in reducing or eliminating safety hazards. Topics include OSHA standards and standards with training requirements, problem solving, illness and injury reporting, accident investigations, and common safety situations encountered in plants. A Primer on Waterborne Coatings (T-6-97) Georgia Department of Natural Resources, Pollution Prevention Assistance Division fact sheet on the advantages of waterborne coatings over solvent-based coatings, including suggested steps for evaluation of applications for waterborne coatings. Vermont Agency of Natural Resources step-by-step self-audit checklist and guide for printers on complying with state environmental laws and regulations. Topics include: the services of the Environmental Assistance Division; ten tips for environmental success; and self-audit checklists for hazardous waste, wastewater discharges, and air emissions. Several supporting appendices are provided. A Printing Pollution Prevention Opportunities Checklist (January 1996) County Sanitation Districts of Los Angeles County checklist on good operating practices, material substitution, process modification, and material recovery for pollution prevention in the printing industry. A Quick Synopsis of Six Important Federal Environmental Laws Ohio Environmental Protection Agency summary of the Clean Air Act; the Comprehensive Environmental Response, Compensation, and Liability Act; the Clean Water Act; the Resource Conservation and Recovery Act; the Superfund Amendments and Reauthorization Act; and the Toxic Substances Control Act. U.S. EPA Small Business Division guide to key environmental assistance providers for small businesses. The guide includes five sections: introduction, federal resources, state resources, private resources, and additional information. In each section, the title, web site address, and phone number(s) are included for each organization. Idaho Department of Environmental Quality list of pollution prevention, recycling, and regulatory resources for printers, including organizations, web sites, and phone numbers. Colorado Department of Public Health and Environment guide to air quality rules for dry cleaners. Dry cleaners can refer to a chart in the front of the guide to determine which section applies to their business. Reporting and recordkeeping forms also are included. Colorado Small Business Assistance Program step-by-step instructions on calculating VOC and HAP air emissions for a business. Michigan Department of Environmental Quality guidance brochure for businesses wishing to implement an environmental management system. A checklist of key development steps, helpful hints, definitions, and sources of additional information are included. A Strategy to Increase the Adoption of Reduced-Risk Pest Management Practices California Environmental Protection Agency, Department of Pesticide Regulation Pest Management Strategy to increase the adoption of reduced-risk pest management practices. Topics include: goals and goal implementation strategies, and frequently asked questions and answers about the Pest Management Strategy. A Summary of New Jersey's Hazardous Waste Management Program New Jersey Technical Assistance Program summary of the state's hazardous waste management program, including generator categories, issues of concern to the regulated generator, shipping hazardous waste, and sources of additional information. A Summary of Open Burning/Recycling/Landfilling Requirements in Wisconsin (AM-201-96, March 2003) Wisconsin Department of Natural Resources summary chart of open burning, recycling, and landfilling requirements for various materials. Massachusetts Department of Environmental Protection summary of hazardous waste regulations for small quantity generators. Topics include: generator status, waste classification, paperwork requirements, housekeeping tips, and Very Small Quantity Generators. Oregon Department of Environmental Quality (DEQ) final report on using The Natural Step framework to develop a plan toward sustainability for automotive mechanical and collision repair shops. This project was funded with EPA PPIS grant money. DEQ, in partnership with the Oregon Automotive Service Association (ASA), Pacific Automotive Trades Association (PATA) and the Oregon Natural Step, offered Portland and Salem area auto mechanical and collisiion repair businesses an opportunity to learn how to apply sustainability to their everyday business activites and work practices. The plan provides the auto shops and DEQ with insights as to how to apply The Natural Step four system conditions to reduce environmental liability, improve worker safety, and increase profits within the auto services industry. Report topics include: project overview, project background, The Natural Step, project process, project meetings, development of sustainability strategies, conclusions, and next steps. Wisconsin Department of Natural Resources brochure on recycling requirements for apartment dwellers and building owners. Waste reduction strategies, tips for reducing and recycling, and information resources are provided. Utah Department of Environmental Quality guidance on minimizing the impact of water runoff from animal feeding operations. Key elements to address water pollution issues include information, education and training, research and demonstrations; prioritization of watersheds impaired by pollutants associated with animal manure; assessment of AFOs and CAFOs within those priority areas to determine which may be sources of pollution and identified as potential CAFOs; permitting goals and objectives; compliance milestones; permit development; testing, record keeping, and monitoring; schedules; and resources. South Carolina Department of Health and Environmental Control compliance assistance guide to the state’s laws and regulations on air pollution, wastewater and solid and hazardous wastes. The first section of the guide contains self-audit checklists that cover wastewater discharge, underground storage tank, and solid and hazardous waste regulations that may apply to your vehicle service shop, tips on preventing or reducing waste, and best management practices. The question sets apply to. The second section is a series of fact sheets on various wastes and other regulatory topics, such as parts cleaning solvents, oil filters, refrigerants, and asbestos. The appendices include sample forms and resource lists. North Carolina Pollution Prevention Pays workbook for textile wet processors on reducing waste through pollution prevention strategies. General pollution prevention concepts, chemical audits, and mechanical audits are discussed. Case studies are provided. AB2628 Eligible Vehicles - Single Occupant Carpool Lane Use Stickers (September 2007) California Air Resources Board list of qualifying electric and alternative fuel vehicles that may be driven in High Occupancy Vehicle lanes. Oregon Department of Environmental Quality fact sheet on the management of abandoned hazardous waste, including management responsibilities, actions to take if abandoned waste is found, and information resources and contacts. Missouri Department of Natural Resources answers to commonly asked questions on the activities and responsibilities of the Abandoned Mine Land Section and the impact of abandoned mines. Missouri Department of Natural Resources brochure on abandoned mine properties, progress in reclaiming mine lands, funding mechanisms, landowner assistance, and sources of information on the web. Abandoned Underground Storage Tanks (August 1997) New Mexico Environment Department fact sheet on abandoned underground storage tanks. Topics include: identifying who is responsible for the tank and who is the owner, registering the tank, owner requirements for removing a tank, closing a UST (permanent and temporary), and sources of additional information. West Virginia Department of Environmental Protection fact sheet on the problems associated with abandoned wells, how abandoned wells pollute, and information sources. Abandoned Wells in South Dakota (March 2007) South Dakota Department of Environment and Natural Resources fact sheet on managing abandoned wells. Topics include: property owner responsibilities, historical background information, locating abandoned wells, environmental and safety hazards, and information sources. Washington State Department of Ecology brochure on how to locate abandoned wells, what dangers they pose, and the process used in decommissioning a well. Abandoned Wells: Forgotten Holes to Groundwater (EB1714, August 1992) Washington State University Cooperative Extension guide to the issues surrounding abandoned wells. Topics include: the extent of the problem, point and nonpoint source pollution, best management practices, capping a well, abandoning a well, well types and regulations governing closure, alternative uses for old wells, and information sources. University of Nebraska Cooperative Extension guide to abandonment plans of an earthen manure storage, anaerobic lagoon or runoff holding pond. Topics include: current knowledge, principles of permanent abandonment, and principles of temporary abandonment. An abandonment plan worksheet is provided. About Brownfields (March 2007) Virginia Department of Environmental Quality answers to frequently asked questions about brownfields and their redevelopment. About Texas Recycled (November 2007) Texas Commission on Environmental Quality fact sheet on a program that promotes companies that use recovered materials to manufacture a product or remanufacture a product in Texas. Topics include: program benefits, incentives, and products that can be labeled as “Texas Recycled.” A Recycled-Content Product Manufacturer Application is provided. About the Massachusetts Environmental Results Program (ERP) Massachusetts Department of Environmental Protection overview of the state’s environmental performance initiative that features a multimedia, sector-based regulatory approach. Three key tools used in the program are self-certification, compliance assistance, and performance measurement. US Virgin Islands Division of Environmental Protection fact sheet on a program to help small businesses understand the environmental rules and issues that affect them. The various services offered to small businesses are described. Massachusetts Department of Environmental Protection overview of the Toxics Use Reduction Act, which establishes a statewide goal of reducing toxic waste generated by 50 percent by 1997, primarily through pollution prevention. Wisconsin Department of Natural Resources fact sheet on the services provided by the Department’s Cooperative Environmental Assistance Bureau, including cross-media, technical and compliance assistance to businesses and specific business sectors. Wyoming Department of Environmental Quality fact sheet on above ground storage tanks covered by the Corrective Action Account, regulatory requirements for all petroleum storage tanks, and spill prevention countermeasures and control planning. Alaska Department of Environmental Conservation guidance manual for aboveground storage tank operators. Topics include: facilities/tank farms; step by step procedures for maintaining and inspecting AST facilities; preventing oil spills, taking safety precautions, preparing for and responding to oil spills; checklists for easy reference to inspect AST facilities, transfer fuel, prepare for and respond to spills; government requirements relating to AST facilities; and references and contacts for further information. Appendices A-C can be found in: http://www.dec.state.ak.us/spar/ipp/docs/astman_app1.pdf Appendices D-E can be found in: http://www.dec.state.ak.us/spar/ipp/docs/astman_app2.pdf Washington State Department of Ecology focus sheet on a facility's need to comply with the state’s Oil Spill Prevention and Contingency Planning Standards for aboveground storage tanks, including facility location, oil delivery and distribution methods, planning requirements, and other storage requirements. Virginia Department of Environmental Quality guidance for operators of certain aboveground storage tank (AST) facilities and pipelines on the requirement to demonstrate they have the financial resources to pay for the costs of containment and cleanup in the event of an oil discharge from a regulated AST or pipeline. Topics include: entities subject to the financial responsibility rules, demonstrated levels of financial responsibility, and mechanisms to demonstrate financial assurance. Sample forms are provided. Louisiana Department of Environmental Quality fact sheet on abrasive blasting, which includes: guidelines; permits, reporting, and recordkeeping; housekeeping suggestions; and pollution prevention strategies. Abrasive Blasting Program - Certified Abrasives (May 2008) California Air Resources Board fact sheet on air pollution standards for sandblasting operations and abrasives certified for dry outdoor blasting. Abrasives: General Information (March 1995) Research Triangle Institute and U.S. EPA Solvent Alternatives Guide (SAGE) fact sheet providing general informaton on blasting op |
"How To" Guide for Stormwater and Urban Watershed Management - Considerations for Stormwater and Urban Watershed Management: Developing a Program for Complying with Stormwater Phase II MS4 Permit Requirements and Beyond (May 2000)
"Recycling Cheerleader" Leads Redondo Beach Hospital to Eco-Victory (#422-96-013, January 1996)
A Pollution Prevention Resource Manual for Metal Finishers (July 1994)